Français
Deutsch
Español
Português
русский 
日本語
Iron Lfp Battery
Description
Technical Parameters
Scope
This specification describes the type and size, performance, technical characteristics, warning and caution of the lithium ion rechargeable cell. The specification only applies to HW 38120HP cell supplied by Zhejiang Xinghai Energy Technology Co., Ltd.
Definition
Rated capacity:
Rated capacity =8Ah, the capacity obtained when a cell is discharged at 2-hour rate to voltage 2.0 V at 25±2.5 OC.
Standard charge method:
At 25±2.5 OC, charged to 3.65V at a constant current of 3C, and then, charged with constant voltage of 3.65V until the charged current drops below 0.01C.
Standard discharge method:At 25±2.5 OC, discharged to 2.5 V at a constant current of 5C.
Cell type, bar code, appearances, and dimensions
Cell type:HW 38120HP
Cell bar code and appearances
Cell dimensions：
Cell specification (fresh cell tested at 25 ± 2.5OC, using standard charge and discharge unless otherwise specified)
|
ITEM |
SPECIFICATION |
|
Nominal capacity |
8Ah @ 0.5C |
|
Minimum capacity |
7.5Ah @ 0.5C |
|
Nominal voltage |
3.2V |
|
Max Charging voltage |
3.65 ±0.05 V |
|
Discharge ending voltage |
2.5 ±0.05 V |
|
Charge current |
Standard charge: 3C Max charge: 10C when T≥10 OC Max charge: 3C when 10 OC≥T≥0 OC Max charge: 0.1C when 0 OC≥T≥-10 OC |
|
Discharge current |
Standard discharge: 5C Max discharge: 15C Max instant discharge: 30C |
|
Recommended charge and discharge cell surface temperature |
Charge: 0～45 OC Discharge: -20～60 OC |
|
Maximum allowable charge and discharge cell surface temperature. Charging and discharging at these conditions will shorten cell cycle life. |
Charge: 60 OC Discharge: 75 OC |
|
Humidity range |
0～90%RH (none condensing) |
|
Internal resistance |
≤4mOhm (AC Impedance, 1000HZ) |
|
Cell dimension |
Height: 136 mm Max Diameter: 38.5mm Max |
|
Weight |
330±5 g |
Technical characteristics
Electronic performance (fresh cell tested at 25 ± 2.5OC, standard charge and discharge unless otherwise specified)
|
NO. |
ITEM |
CRITERION |
|
|
5.1.1 |
Discharge rate capability |
discharge capacity at 5C |
≥7.7Ah |
|
discharge capacity at 10C |
≥7.6Ah |
||
|
discharge capacity at 15C |
≥7.2Ah |
||
|
5.1.2 |
Cycle life |
discharge capacity of 3000th cycle @ 100% DOD |
≥6.4Ah |
|
5.1.3 |
High-Low temperature discharge performance (0.5C discharge) |
discharge capacity at -10 OC |
≥4.8Ah |
|
discharge capacity at 0 OC |
≥6Ah |
||
|
discharge capacity at 60 OC |
≥7.8Ah |
||
|
5.1.4 |
Storage performance |
residual capacity after 28d storage |
≥7.6Ah |
|
recover capacity after 28d storage |
≥7.84Ah |
||
Environmental and safety characteristics
|
ITEM |
TEST METHOD |
CRITERION |
|
5.2.1 Over discharge |
Under the battery discharge to the cut-off voltage, then discharge with 0.1C, until the voltage of battery is zero. |
No explosion, no fire, no leakage |
|
5.2.2 Over charge |
After the battery fully charge, overcharge with 0.5C for one hour. |
No explosion, no fire, no leakage |
|
5.2.3 reverse charge |
After the battery fully charge, with 1/6C reverse current constant current charging for 8h. |
No explosion, no fire, no leakage |
|
5.2.4 130℃ high temperature |
After the battery is fully charged, the battery is placed in the oven for 3OC ~ 7OC / min heating rate, the temperature rose to 130 OC after the start time, and (130 ± 2) OC temperature range of security within 1h. |
No explosion, no fire, no leakage |
|
5.2.5 High and low temperature impact |
When the battery is fully charged, shelved at -40 OC for 1h, then shelved 1h at 85 OC, do such cycle for 32 times, then remove under room temperature for 6h. |
No explosion, no fire, no leakage |
|
5.2.6 Vibration |
When the battery is fully charged，put the battery on the vibration table of amplitude 2mm, frequency 10Hz-30Hz for one hour. |
No explosion, no fire, no leakage, no deformation. |
|
5.2.7 Free fall drop |
After the battery fully charge, let the battery fall from a height of 1.0m to the hard wood with thickness of 20mm, each surface for once. |
No explosion, no fire, no leakage |
|
5.2.8 Soaking |
After the battery fully charged, the battery was sink at room temperature, depth will be subject to immersion cell surface within 24 h, then take out under room temperature for 6 h. |
No explosion, no fire, no leakage |
|
5.2.9 Extrusion |
After the battery is fully charged, the battery surface with special equipment was squeezed until the batteries dimensions changed to 1 ~ 3mm. |
No explosion, no fire |
|
5.2.10 Short circuit |
When the battery is fully charged, with the internal resistance of not more than 50mΩ wires connecting to the battery positive and negative extremes for 1h. |
No explosion, no fire, no leakage |
|
5.2.11 Constant temperature/hu midity/heat |
After the battery fully charged the in the relative humidity of 90% ~ 95% of the constant temperature and humidity box, duration of 48 h, then take out under room temperature for 6 h. |
No explosion, no fire, no leakage |
|
5.2.12 Nail |
A nail (diameter : 2.5~5mm) is penetrated vertically through the center of the fully charged cells. |
No explosion, no fire, no leakage |
Warning in handling the lithium-ion cell
To prevent the possibility of the cell from leaking, heating, explosion, please observe the following precautions:
Don’t immerse the cell in water;
Don’t use and leave the cell near a heat source such as fire or heater; When charging, use a cell charger specifically for that purpose; Don’t reverse the positive and negative terminals;
Don’t discard the cell in fire or heater;
Don’t connect the cell to an electrical outlet directly; Don’t discard the cell in fire or heater;
Don’t connect the positive and negative terminal directly with metal objects;
Don’t transport and store the cell together with metal objects such as necklaces, hairpins; Don’t directly solder the cell;
Don’t pierce the cell with a nail or other sharp object.
Don’t leave the cell with low SOC for long time, it should keep the cell with around 50% for long term storage (less than 6 months). Should charge the cell to 50% SOC after each 6 months.
Shipping
During transportation , keep the battery from acutely vibration, impacting, polarization, drenching.
Why choose us?
- We are dedicated to producing high-quality Lithium Iron Phosphate Battery products at affordable prices.
- We are always committed to the development and utilization of new products by continuously improving our technologies.
- We strive for excellence in all aspects of our Lithium Iron Phosphate Battery product manufacturing and services.
- We uphold high standards and continue to carry out management reforms, pursuing simultaneous improvement of efficiency and value.
- Our Lithium Iron Phosphate Battery products are highly versatile and cater to a broad range of applications.
- Our customers recognize the consistent excellence of our company's Iron Lfp Battery and are always inclined to buy our products.
- We offer a comprehensive warranty on all our Lithium Iron Phosphate Battery products.
- We have established a good corporate image by virtue of high-quality products and preferential prices at production terminals.
- Our factory is capable of producing large quantities of Lithium Iron Phosphate Battery products quickly.
- We attach great importance to the research and development of new products, adhere to the road of combining production, learning and research, and take the road of technological innovation.
Iron LFP Battery – The Promising Solution for Your Energy Needs
Introducing the revolutionary Iron LFP Battery – the most innovative and advanced energy storage solution on the market. As a leading manufacturer of renewable energy products, we are proud to offer this superior battery to wholesalers from around the world. With superior performance, safety, and reliability, this battery is the perfect choice for any residential or commercial energy storage system.
Overview:
The Iron LFP Battery is a lithium iron phosphate battery that is designed to store energy from solar panels or other renewable sources. It is the perfect solution for both residential and commercial applications. With its superior safety, longer lifespan, and exceptional performance, the Iron LFP Battery is an excellent choice for those who care about the environment and want to reduce their energy costs.
Features and Benefits:
1. Fast Charging and Discharging:
The Iron LFP Battery charges faster than traditional lead acid batteries and discharges more efficiently. This means that you can get more energy out of the battery and use it for a longer period.
2. Longer Lifespan:
The Iron LFP Battery has a longer lifespan compared to traditional lead acid batteries. It can last up to 10 years or 10,000 cycles, which significantly reduces the cost of battery replacement.
3. Safety:
The Iron LFP Battery has a superior safety profile compared to other batteries. It is more stable and less likely to catch fire or explode, making it the safest choice for residential and commercial energy storage systems.
4. High Performance:
The Iron LFP Battery has a higher energy density compared to other batteries. It can store more energy in a smaller space, making it a more accessible option for limited space installation.
5. Environmentally Friendly:
As a leading manufacturer of renewable energy products, we prioritize the environment and strive to reduce the environmental impact of our products. The Iron LFP Battery is designed to be eco-friendly, reducing carbon emissions and promoting a sustainable future.
6. Versatile:
The Iron LFP Battery is a versatile battery that can handle a broader range of temperatures, making it ideal for various environments.
Applications:
The Iron LFP Battery is a versatile battery that can be used in a variety of applications. It is the perfect solution for both residential and commercial energy storage systems. The Iron LFP Battery is ideal for:
1. Home energy storage
2. Commercial energy storage
3. Telecommunications backup power
4. Emergency backup power
5. Uninterrupted Power Supply (UPS)
6. Off-grid solar power systems
7. Peak shaving
8. Grid stabilization
Specification:
The Iron LFP Battery has a wide range of specifications that cater to all your needs:
1. Nominal Voltage: 12.8 V
2. Capacity: 50 Ah to 300 Ah
3. Maximum Discharge Current: 200 A to 600 A
4. Charging Voltage: 14.6 V
5. Operating Temperature: -20 ℃ to +60 ℃
Conclusion:
The Iron LFP Battery is the perfect solution for renewable energy storage systems. It offers superior safety, longer lifespan, and better performance than traditional batteries. As a wholesale manufacturer of renewable energy products, we take pride in delivering the most advanced and reliable energy storage solutions to our customers. Contact us today to learn more about our product and take advantage of our wholesale rates.
Hot Tags: iron lfp battery, China iron lfp battery manufacturers, suppliers, factory, Lithium Ion Phosphate Battery Pack, Lithium Ferro Phosphate Lfp Battery, Lithium Ion Phosphorus Battery, Iron Lfp Battery, 3 2 V Lithium Iron Phosphate Battery, Li Ion Iron Phosphate Battery
Previous
No InformationSend Inquiry
